
Racer Guide · Descending
How to descend safely in a group in a road race
Where to be before the road tips down, how to brake and corner at speed with riders around you, and what to do if you lose the wheel.
The short answer
To descend safely in a group, get into position before the descent starts, then hold your place: keep a bigger gap than on the flat, brake in a straight line before each bend and ease off through it, keep your outside pedal down and look at the exit, and pass only on straight road with room to spare. On open-road courses like the Berkeley Hills Road Race in the Berkeley Omnium, stay on your side of the road. If you lose the wheel, don't chase on the way down; close the gap on the flat at the bottom.
Descending at a glance
- Before it starts
- Move up at the top. Passing on a fast descent costs a lot and risks more.
- Braking
- Brake in a straight line before the bend, then ease off and let the bike turn.
- In the bend
- Outside pedal down, weight on it, eyes on the exit.
- Open roads
- The Berkeley Hills course isn't closed to traffic. Stay on your side of the road.
- Lost the wheel?
- Don't take risks to close it on the way down. Chase on the flat at the bottom.
Why does descending matter in a road race?
A good descent costs nothing. You sit in the draft, recover and arrive at the bottom with the group. A nervous one turns into a gap, and the gap turns into a solo chase on the next flat while the riders you were with eat and drink. On a hilly course that happens every lap.
It's also where pack crashes get expensive. Speeds are higher, braking distances are longer, and one rider grabbing the brakes in a bend affects everyone behind them. Descending well is mostly about being smooth and predictable, the same skill as pack riding at a higher speed.
Where should you be when the descent starts?
Near the front, and already there before the road tips down. Speed strings the field into a line, so the place you hold at the top is roughly where you'll be at the bottom. Riders near the back get the accordion: braking hard for every bend and sprinting out of it to close gaps that opened ahead of them.
- Move up on the last of the climb or the flat before the descent, not on the way down.
- Eat and drink at the top. Both hands belong on the bars once it gets fast.
- Pick a rider ahead who descends smoothly and follow their line, while still looking past them down the road.
How do you brake and corner on a fast descent?
Do your braking before the bend, in a straight line, using both brakes. Then ease off and let the bike turn. Braking hard while leaned over is how tires lose grip, and it makes you stand the bike up and run wide into the next rider or the other lane.
- Ride in the drops: lower weight, a stronger grip and the most braking power.
- Keep your arms loose and elbows bent so bumps go into your arms, not the steering.
- In the bend, push the outside pedal down and put your weight on it.
- Look where you want to go, at the exit of the bend, not at the edge of the road.
- On the straights, control speed with light, steady braking instead of one big grab before the corner.
- In the wet, brake earlier and more gently and give yourself more room. Wet brakes take longer to bite, and paint lines grip less.
How do you descend with other riders around you?
Hold your line and leave more space than you would on the flat. A wheel's length that feels fine at 20 mph is a short gap at 40.
- Pick a line into each bend and stay on it. Riders behind you are steering off your movements.
- Don't pass in a bend. If you need to move up, do it on a straight with room, and let the rider know you're there.
- Don't dive inside another rider on a corner entry. They can't see you and they're about to turn into that space.
- Leave room on the outside of the bend too. The rider beside you may run a little wide.
- On roads that aren't closed, stay on your side of the road, even if the racing line is across it.
What are the descents on the Berkeley Hills Road Race?
The course recon marks two long descents on each lap of the Berkeley Hills Road Race, between the climbs. They're where you recover, and where position you won on the climbs gets kept or lost.
| Descent | Miles into the lap | Terrain | What to do |
|---|---|---|---|
| San Pablo Dam Road descent | 3.9 to 5.4 | Descends about 290 ft over 1.5 mi | Speed strings the field out. Move up before the descent starts, then hold your place: passing on a fast downhill costs a lot and risks more. |
| Descent past Briones Reservoir | 15.6 to 18.5 | About 90 ft up and 690 ft down over 2.9 mi | This is the place to recover. Drink and eat at the top, before the road gets fast. |
The course is open to traffic, so stay on your side of the road on every descent. There's no wheel support on the course, so a puncture on a fast downhill usually ends your race. Check your tires and brakes before you start.
What should you do if you lose the wheel on a descent?
Let it go for now. Taking risks to close a gap on the way down is how riders crash, and a rider who descends fast but badly can take others down too. Ride the descent at a speed you control, then close the gap where the road flattens out, ideally with other riders in the same spot so you can share the work.
Most gaps opened on a descent are a few seconds. On a flat road with someone to work with, that comes back.
How can you get better at descending?
Ride descents you know, often. Start alone on a familiar road, working on braking points and body position at a speed that feels easy. Then descend the same road behind a smooth rider on a group ride. Speed comes with repetition on roads you know.
Some coaches who work with Omnium racers run descending clinics, where you can practice braking and cornering with feedback.
Before race day, ride the Three Bears loop if you can, so the descents aren't a surprise.
Questions
How to descend safely in a group in a road race: FAQ
Should I use my front brake when descending?
Yes. Use both brakes; most of your stopping power comes from the front. Do your hard braking in a straight line before the bend, and ease off once you start turning so the tires keep their grip.
Is it safe to pass on a descent in a road race?
Only on a straight with plenty of room, and with a word to the rider you're passing. Never pass in a bend or dive inside a rider on a corner entry. It's better to move up before the descent starts.
How much space should I leave on a descent?
More than on the flat. Speeds are higher, so a gap that feels normal on the flat gives you much less time to react. Leave enough space to brake without hitting the rider in front.
What do I do if I get dropped on a descent?
Descend at a speed you control and close the gap on the flat at the bottom, ideally with other riders. Chasing on the way down risks a crash for a few seconds you can usually win back.
Are the roads closed during the Berkeley Hills Road Race?
No. The course is open to traffic, so riders stay on their side of the road, including on the descents. There's no wheel support on the course.